How To Use PVC Granulating Line For A Longer Time

To get the best from your PVC granulating line, you must know how to prolong its life. In fact, increasing the production life of every machine brings more revenue to the company and reduces operation costs.

To use the PCV granulating line longer, there are things you must implement. These are according to the minimum standards required by the manufacturers. Meanwhile, it is essential to source your machine from a reputable manufacturer. It will save you the stress of incessant breakdown.

Quick Tips You Must Not Forget

1. It is important to prevent strangers from moving around the machine, let alone permitting them to operate the machine without your consent.

2. Ensure to lubricate all the parts of the machine the require lubrication. Make sure that you use the appropriate and the right amount of oil.

3. There should be no smoking or naked light around the machine. Moreover, give appropriate attention to the fire safety of the working environment.

4. Do not use recycled materials that are of low quality with metal silt or impurities. Also, avoid placing metal objects near the feed inlet. If it falls into the feed inlet, it can cause jamming or damage to the machine.

Ways Of Increasing The Lifespan Of PVC Granulating Line

The following ways can increase the working capacity of your machine for a longer time:

1. Proper Maintenance

Just like other machines, it is essential to carry out proper maintenance of the machine by:

· Placing the machine in a well-ventilated place for the heat to dissipate easily.

· Lubricate the bearings of the machine to reduce friction between parts.

· Tighten the screws of the moveable knife to ensure proper fixation between the knife holder and the blade.

· Sharpen the edges of the blade to reduce damage to the blunt blade.

· Clean the machine after use to avoid rust and dirt on the outer parts of the machine.

· Ensure that the machine is well-grounded before the commencement of operation.

2. Granulating Line Head Checking

The head of the pelletizer can block or discharge granules poorly due to the following reasons:

· Block caused by foreign matter

· A specific part of the machine is not working optimally.

· There is an uneven distribution of the pressure from the machine

Ensure to:

· Inspect the heater for faults and replace it if the need arises.

· Check the machine head and the extrusion system to ensure proper cleaning.

· Check the set temperature to ascertain if it is enough to do the work.

3. Avoid Insufficient Extrusion

When the granules solidify before filling the compartment, it will not bring out the required shape. To keep the machine working optimally without any obstruction, ensure that the temperature of the nozzle and the barrel are appropriate for the task.

Furthermore, check the mould to ensure that the nozzle hole is not too small for the passage of the granules.

Contact Us For Quality PVC Granulating Line

It is essential to invest in a quality machine that lasts longer. As a reputable manufacturer, we produce quality machines that meet the needs of our clients. Kindly reach out to us for an affordable product for your company. Click here to view our products.