PVC Pipe Production Line

This production line is mainly used in producing of PVC pipes with various tube diameter and wall thickness in the aspects such as the agricultural, constructional, and cable laying etc. the unit is composed of the conical twin-screw extruder, vacuum modes such as two claw, three claw and so on. Choose the saw blade cutting type or the planetary cutting type. It is additionally attached manufacturer of the inner wall spiral coil according to the client requirements. Produce inner wall spiral pipe, inner wall hollow and core foam pipe, ect. The planetary cutting machine is fully automatic computer control, it has such advantages of simple operation, reliable property, ect. It has reached world advanced level.

Technical parameters:

Produce inner wall spiral pipe, inner wall hollow and core foam pipe, ect. The planetary cutting machine is fully automatic computer control, it has such advantages of simple operation, reliable property, ect. It has reached world advanced level.

As a PVC pipe extruder manufacturer, we always adhere to the "integrity, development, innovation, and win-win" logo, and we are honored to cooperate with friends at home and abroad by providing high-quality products, technology and services.

The specification and size of PVC water supply pipe are Φ 20, Φ 25, Φ 32, Φ 40, Φ 50, Φ 63, Φ 75, Φ 90, Φ 110, Φ 125, Φ 140, Φ 160, Φ 180, Φ 200, Φ 225, Φ 250, Φ 280, Φ 315, Φ 355, Φ 400, Φ 450, Φ 500, Φ 630, Φ 720, Φ 800, etc. The pressure shown on PVC water supply pipe is expressed as nominal pressure, expressed in MPa. The nominal pressure is specified as 0.63Mpa, 0.8MPa, 1.0MPa, 1.25mpa, 1.6Mpa, etc. The minimum diameter pipe of each pressure zone is specified as: the minimum diameter of 0.63Mpa pipe is 63mm, the minimum diameter of 0.8MPa pipe is 50mm, the minimum diameter of 1.0MPa pipe is 40mm, the minimum diameter of 1.25mpa pipe is 32mm, and the minimum diameter of 1.6Mpa pipe is 20mm and 25mm. The pipe length is generally 4m, 6m and 8m, which can also be determined by the supplier and the demander through consultation.

(1) The pressure shown in PVC water supply pipe is expressed as nominal pressure, which is expressed in MPa. 1MPa ≈ 10kgf / cm2 is the working pressure of conveying medium under the condition of 20 ℃. However, with the increase of medium temperature (medium with temperature higher than 50 ℃ shall not be transported), the working pressure will decrease accordingly, so the safety factor of sufficient pressure shall be considered in the selection of water supply pipeline objectively 

(2) The nominal pressure of water supply pipe is specified as: 0.6MPa, 0.8MPa, 1.0MPa, 1.25mpa, 1.6Mpa, etc.

(3) The nominal pressure of pipes of the same specification is generally divided by the wall thickness of pipes.

(4) The minimum diameter pipe of each pressure zone is specified as: the minimum diameter of 0.6MPa pipe is 63mm, the minimum diameter of 0.8MPa pipe is 50mm, the minimum diameter of 1.0MPa pipe is 40mm, the minimum diameter of 1.25mpa pipe is 32mm, and the minimum diameter of 1.6Mpa pipe is 20mm and 25mm.

(5) The nominal pressure of water supply pipe is generally 1.6Mpa, which is matched with pipes of various pressures.

wooden pallet, PE film package.